Grand aari embroidery blouse design with tracing paper

on
Grand aari embroidery blouse design
Watch this full video on YouTube
Materials Used:
  1. Aari embroidery iron needle for thread and beads
  2. Gold zari thread
  3. Sugar bead (2 mm to 2.5 mm size bead)
  4. Green silk thread
  5. Thilagam shape kundan stone (Green and maroon colour)
  6. Round shape kundan stone (Green and maroon colour)
  7. White stone chain- medium size
  8. Kundan stone (Gold colour)
  9. Chakri
  10. Jarkan stone (white colour)
  11. Fabric glue
Follow the steps:

Step 1- Trace the design, Use the tracing paper attached in below.

Step 2- Now start making the design of the neckline. Start with a line of chain stitch using gold zari thread and complete with 4 lines.
 
Step 3- Use the bead aari needle for sugar bead and fill next to the chain stitch.

Step 4- Now use the bead aari needle to stitch the stone chain or Use fabric glue to stick.

Step 5- Next, Fill with sugar bead.

Step 6- Apply fabric glue to stick the Thilagam shape kundan stone as per the design.

Step 7- Now fill with sugar bead, then stone chain and sugar bead step-by-step.

Step 8- Apply fabric glue to stick round shape kundan stone.

Step 9- Start to fill the kodi design using sugar bead.

Step 10- Stick the gold colour kundan stone around the kodi design.

Step 11- Now, fill the leafs with green silk thread.

Step 12- To complete the design with a chain stitch around the kodi and leaf design.

Step 13- Place the chakri in the gaps and secure them with glue.

Step 14- Apply a thin layer of glue on chakri and place the jarkan stone.


Back neck

Sleeve design
Tracing paper:

Step 1- Trace the design, Use the tracing paper attached in below. Step 2- Cut out the design using a sharp pair of scissors. Step 3- Place the design on the fabric and pin it in place. Step 4- Sew the design/ make a holes on drawing onto the tracing paper using a sewing machine or by hand.
Step 5- Use tracing liquid to trace the design. Step 6- Remove the pins.

How to make tracing liquid using tracing powder: Step 1- Place the tracing powder in a bowl and add a few drops of kerosene. Step 2- Stir the mixture until it forms a thick paste. Step 3- Apply the paste on the tracing paper and let it dry.

Back neck
Sleeve


Thank you


Comments

Post a Comment